Skip to main content
Version: 1.22.6

Command Line

Usage​

gitea [global options] command [command or global options] [arguments...]

Global options​

All global options can be placed at the command level.

  • --help, -h: Show help text and exit. Optional.
  • --version, -v: Show version and exit. Optional. (example: Gitea version 1.1.0+218-g7b907ed built with: bindata, sqlite).
  • --work-path path, -w path: Gitea's work path. Optional. (default: the binary's path or $GITEA_WORK_DIR)
  • --custom-path path, -C path: Gitea's custom folder path. Optional. (default: WorkPath/custom or $GITEA_CUSTOM).
  • --config path, -c path: Gitea configuration file path. Optional. (default: CustomPath/conf/app.ini).

NB: The defaults custom-path, config and work-path can also be changed at build time (if preferred).

Commands​

web​

Starts the server:

  • Options:
    • --port number, -p number: Port number. Optional. (default: 3000). Overrides configuration file.
    • --install-port number: Port number to run the install page on. Optional. (default: 3000). Overrides configuration file.
    • --pid path, -P path: Pidfile path. Optional.
    • --quiet, -q: Only emit Fatal logs on the console for logs emitted before logging set up.
    • --verbose: Emit tracing logs on the console for logs emitted before logging is set-up.
  • Examples:
    • gitea web
    • gitea web --port 80
    • gitea web --config /etc/gitea.ini --pid /some/custom/gitea.pid
  • Notes:
    • Gitea should not be run as root. To bind to a port below 1024, you can use setcap on Linux: sudo setcap 'cap_net_bind_service=+ep' /path/to/gitea. This will need to be redone every time you update Gitea.

admin​

Admin operations:

  • Commands:
    • user:
      • list:
        • Options:
          • --admin: List only admin users. Optional.
        • Description: lists all users that exist
        • Examples:
          • gitea admin user list
      • delete:
        • Options:
          • --email: Email of the user to be deleted.
          • --username: Username of user to be deleted.
          • --id: ID of user to be deleted.
          • One of --id, --username or --email is required. If more than one is provided then all have to match.
        • Examples:
          • gitea admin user delete --id 1
      • create:
        • Options:
          • --name value: Username. Required. As of Gitea 1.9.0, use the --username flag instead.
          • --username value: Username. Required. New in Gitea 1.9.0.
          • --password value: Password. Required.
          • --email value: Email. Required.
          • --admin: If provided, this makes the user an admin. Optional.
          • --access-token: If provided, an access token will be created for the user. Optional. (default: false).
          • --must-change-password: The created user will be required to set a new password after the initial login, default: true. It could be disabled by --must-change-password=false.
          • --random-password: If provided, a randomly generated password will be used as the password of the created user. The value of --password will be discarded. Optional.
          • --random-password-length: If provided, it will be used to configure the length of the randomly generated password. Optional. (default: 12)
        • Examples:
          • gitea admin user create --username myname --password asecurepassword --email me@example.com
      • change-password:
        • Options:
          • --username value, -u value: Username. Required.
          • --password value, -p value: New password. Required.
          • --must-change-password: The user is required to set a new password after the login, default: true. It could be disabled by --must-change-password=false.
        • Examples:
          • gitea admin user change-password --username myname --password asecurepassword
      • must-change-password:
        • Args:
          • [username...]: Users that must change their passwords
        • Options:
          • --all, -A: Force a password change for all users
          • --exclude username, -e username: Exclude the given user. Can be set multiple times.
          • --unset: Revoke forced password change for the given users
      • generate-access-token:
        • Options:
          • --username value, -u value: Username. Required.
          • --token-name value, -t value: Token name. Required.
          • --scopes value: Comma-separated list of scopes. Scopes follow the format [read|write]:<block> or all where <block> is one of the available visual groups you can see when opening the API page showing the available routes (for example repo).
        • Examples:
          • gitea admin user generate-access-token --username myname --token-name mytoken
          • gitea admin user generate-access-token --help
    • regenerate
      • Options:
        • hooks: Regenerate Git Hooks for all repositories
        • keys: Regenerate authorized_keys file
      • Examples:
        • gitea admin regenerate hooks
        • gitea admin regenerate keys
    • auth:
      • list:
        • Description: lists all external authentication sources that exist
        • Examples:
          • gitea admin auth list
      • delete:
        • Options:
          • --id: ID of source to be deleted. Required.
        • Examples:
          • gitea admin auth delete --id 1
      • add-oauth:
        • Options:
          • --name: Application Name.
          • --provider: OAuth2 Provider.
          • --key: Client ID (Key).
          • --secret: Client Secret.
          • --auto-discover-url: OpenID Connect Auto Discovery URL (only required when using OpenID Connect as provider).
          • --use-custom-urls: Use custom URLs for GitLab/GitHub OAuth endpoints.
          • --custom-tenant-id: Use custom Tenant ID for OAuth endpoints.
          • --custom-auth-url: Use a custom Authorization URL (option for GitLab/GitHub).
          • --custom-token-url: Use a custom Token URL (option for GitLab/GitHub).
          • --custom-profile-url: Use a custom Profile URL (option for GitLab/GitHub).
          • --custom-email-url: Use a custom Email URL (option for GitHub).
          • --icon-url: Custom icon URL for OAuth2 login source.
          • --skip-local-2fa: Allow source to override local 2FA. (Optional)
          • --scopes: Additional scopes to request for this OAuth2 source. (Optional)
          • --required-claim-name: Claim name that has to be set to allow users to login with this source. (Optional)
          • --required-claim-value: Claim value that has to be set to allow users to login with this source. (Optional)
          • --group-claim-name: Claim name providing group names for this source. (Optional)
          • --admin-group: Group Claim value for administrator users. (Optional)
          • --restricted-group: Group Claim value for restricted users. (Optional)
          • --group-team-map: JSON mapping between groups and org teams. (Optional)
          • --group-team-map-removal: Activate automatic team membership removal depending on groups. (Optional)
        • Examples:
          • gitea admin auth add-oauth --name external-github --provider github --key OBTAIN_FROM_SOURCE --secret OBTAIN_FROM_SOURCE
      • update-oauth:
        • Options:
          • --id: ID of source to be updated. Required.
          • --name: Application Name.
          • --provider: OAuth2 Provider.
          • --key: Client ID (Key).
          • --secret: Client Secret.
          • --auto-discover-url: OpenID Connect Auto Discovery URL (only required when using OpenID Connect as provider).
          • --use-custom-urls: Use custom URLs for GitLab/GitHub OAuth endpoints.
          • --custom-tenant-id: Use custom Tenant ID for OAuth endpoints.
          • --custom-auth-url: Use a custom Authorization URL (option for GitLab/GitHub).
          • --custom-token-url: Use a custom Token URL (option for GitLab/GitHub).
          • --custom-profile-url: Use a custom Profile URL (option for GitLab/GitHub).
          • --custom-email-url: Use a custom Email URL (option for GitHub).
          • --icon-url: Custom icon URL for OAuth2 login source.
          • --skip-local-2fa: Allow source to override local 2FA. (Optional)
          • --scopes: Additional scopes to request for this OAuth2 source.
          • --required-claim-name: Claim name that has to be set to allow users to login with this source. (Optional)
          • --required-claim-value: Claim value that has to be set to allow users to login with this source. (Optional)
          • --group-claim-name: Claim name providing group names for this source. (Optional)
          • --admin-group: Group Claim value for administrator users. (Optional)
          • --restricted-group: Group Claim value for restricted users. (Optional)
        • Examples:
          • gitea admin auth update-oauth --id 1 --name external-github-updated
      • add-smtp:
        • Options:
          • --name: Application Name. Required.
          • --auth-type: SMTP Authentication Type (PLAIN/LOGIN/CRAM-MD5). Default to PLAIN.
          • --host: SMTP host. Required.
          • --port: SMTP port. Required.
          • --force-smtps: SMTPS is always used on port 465. Set this to force SMTPS on other ports.
          • --skip-verify: Skip TLS verify.
          • --helo-hostname: Hostname sent with HELO. Leave blank to send current hostname.
          • --disable-helo: Disable SMTP helo.
          • --allowed-domains: Leave empty to allow all domains. Separate multiple domains with a comma (',').
          • --skip-local-2fa: Skip 2FA to log on.
          • --active: This Authentication Source is Activated. Remarks: --force-smtps, --skip-verify, --disable-helo, --skip-loca-2fs and --active options can be used in form:
          • --option, --option=true to enable
          • --option=false to disable If those options are not specified value would not be changed in update-smtp or would use default false value in add-smtp
        • Examples:
          • gitea admin auth add-smtp --name ldap --host smtp.mydomain.org --port 587 --skip-verify --active
      • update-smtp:
        • Options:
          • --id: ID of source to be updated. Required.
          • other options are shared with add-smtp
        • Examples:
          • gitea admin auth update-smtp --id 1 --host smtp.mydomain.org --port 587 --skip-verify=false
          • gitea admin auth update-smtp --id 1 --active=false
      • add-ldap: Add new LDAP (via Bind DN) authentication source
        • Options:
          • --name value: Authentication name. Required.
          • --not-active: Deactivate the authentication source.
          • --security-protocol value: Security protocol name. Required.
          • --skip-tls-verify: Disable TLS verification.
          • --host value: The address where the LDAP server can be reached. Required.
          • --port value: The port to use when connecting to the LDAP server. Required.
          • --user-search-base value: The LDAP base at which user accounts will be searched for. Required.
          • --user-filter value: An LDAP filter declaring how to find the user record that is attempting to authenticate. Required.
          • --admin-filter value: An LDAP filter specifying if a user should be given administrator privileges.
          • --restricted-filter value: An LDAP filter specifying if a user should be given restricted status.
          • --username-attribute value: The attribute of the user’s LDAP record containing the user name.
          • --firstname-attribute value: The attribute of the user’s LDAP record containing the user’s first name.
          • --surname-attribute value: The attribute of the user’s LDAP record containing the user’s surname.
          • --email-attribute value: The attribute of the user’s LDAP record containing the user’s email address. Required.
          • --public-ssh-key-attribute value: The attribute of the user’s LDAP record containing the user’s public ssh key.
          • --avatar-attribute value: The attribute of the user’s LDAP record containing the user’s avatar.
          • --bind-dn value: The DN to bind to the LDAP server with when searching for the user.
          • --bind-password value: The password for the Bind DN, if any.
          • --attributes-in-bind: Fetch attributes in bind DN context.
          • --synchronize-users: Enable user synchronization.
          • --page-size value: Search page size.
        • Examples:
          • gitea admin auth add-ldap --name ldap --security-protocol unencrypted --host mydomain.org --port 389 --user-search-base "ou=Users,dc=mydomain,dc=org" --user-filter "(&(objectClass=posixAccount)(|(uid=%[1]s)(mail=%[1]s)))" --email-attribute mail
      • update-ldap: Update existing LDAP (via Bind DN) authentication source
        • Options:
          • --id value: ID of authentication source. Required.
          • --name value: Authentication name.
          • --not-active: Deactivate the authentication source.
          • --security-protocol value: Security protocol name.
          • --skip-tls-verify: Disable TLS verification.
          • --host value: The address where the LDAP server can be reached.
          • --port value: The port to use when connecting to the LDAP server.
          • --user-search-base value: The LDAP base at which user accounts will be searched for.
          • --user-filter value: An LDAP filter declaring how to find the user record that is attempting to authenticate.
          • --admin-filter value: An LDAP filter specifying if a user should be given administrator privileges.
          • --restricted-filter value: An LDAP filter specifying if a user should be given restricted status.
          • --username-attribute value: The attribute of the user’s LDAP record containing the user name.
          • --firstname-attribute value: The attribute of the user’s LDAP record containing the user’s first name.
          • --surname-attribute value: The attribute of the user’s LDAP record containing the user’s surname.
          • --email-attribute value: The attribute of the user’s LDAP record containing the user’s email address.
          • --public-ssh-key-attribute value: The attribute of the user’s LDAP record containing the user’s public ssh key.
          • --avatar-attribute value: The attribute of the user’s LDAP record containing the user’s avatar.
          • --bind-dn value: The DN to bind to the LDAP server with when searching for the user.
          • --bind-password value: The password for the Bind DN, if any.
          • --attributes-in-bind: Fetch attributes in bind DN context.
          • --synchronize-users: Enable user synchronization.
          • --page-size value: Search page size.
        • Examples:
          • gitea admin auth update-ldap --id 1 --name "my ldap auth source"
          • gitea admin auth update-ldap --id 1 --username-attribute uid --firstname-attribute givenName --surname-attribute sn
      • add-ldap-simple: Add new LDAP (simple auth) authentication source
        • Options:
          • --name value: Authentication name. Required.
          • --not-active: Deactivate the authentication source.
          • --security-protocol value: Security protocol name. Required.
          • --skip-tls-verify: Disable TLS verification.
          • --host value: The address where the LDAP server can be reached. Required.
          • --port value: The port to use when connecting to the LDAP server. Required.
          • --user-search-base value: The LDAP base at which user accounts will be searched for.
          • --user-filter value: An LDAP filter declaring how to find the user record that is attempting to authenticate. Required.
          • --admin-filter value: An LDAP filter specifying if a user should be given administrator privileges.
          • --restricted-filter value: An LDAP filter specifying if a user should be given restricted status.
          • --username-attribute value: The attribute of the user’s LDAP record containing the user name.
          • --firstname-attribute value: The attribute of the user’s LDAP record containing the user’s first name.
          • --surname-attribute value: The attribute of the user’s LDAP record containing the user’s surname.
          • --email-attribute value: The attribute of the user’s LDAP record containing the user’s email address. Required.
          • --public-ssh-key-attribute value: The attribute of the user’s LDAP record containing the user’s public ssh key.
          • --avatar-attribute value: The attribute of the user’s LDAP record containing the user’s avatar.
          • --user-dn value: The user’s DN. Required.
        • Examples:
          • gitea admin auth add-ldap-simple --name ldap --security-protocol unencrypted --host mydomain.org --port 389 --user-dn "cn=%s,ou=Users,dc=mydomain,dc=org" --user-filter "(&(objectClass=posixAccount)(cn=%s))" --email-attribute mail
      • update-ldap-simple: Update existing LDAP (simple auth) authentication source
        • Options:
          • --id value: ID of authentication source. Required.
          • --name value: Authentication name.
          • --not-active: Deactivate the authentication source.
          • --security-protocol value: Security protocol name.
          • --skip-tls-verify: Disable TLS verification.
          • --host value: The address where the LDAP server can be reached.
          • --port value: The port to use when connecting to the LDAP server.
          • --user-search-base value: The LDAP base at which user accounts will be searched for.
          • --user-filter value: An LDAP filter declaring how to find the user record that is attempting to authenticate.
          • --admin-filter value: An LDAP filter specifying if a user should be given administrator privileges.
          • --restricted-filter value: An LDAP filter specifying if a user should be given restricted status.
          • --username-attribute value: The attribute of the user’s LDAP record containing the user name.
          • --firstname-attribute value: The attribute of the user’s LDAP record containing the user’s first name.
          • --surname-attribute value: The attribute of the user’s LDAP record containing the user’s surname.
          • --email-attribute value: The attribute of the user’s LDAP record containing the user’s email address.
          • --public-ssh-key-attribute value: The attribute of the user’s LDAP record containing the user’s public ssh key.
          • --avatar-attribute value: The attribute of the user’s LDAP record containing the user’s avatar.
          • --user-dn value: The user’s DN.
        • Examples:
          • gitea admin auth update-ldap-simple --id 1 --name "my ldap auth source"
          • gitea admin auth update-ldap-simple --id 1 --username-attribute uid --firstname-attribute givenName --surname-attribute sn

cert​

Generates a self-signed SSL certificate. Outputs to cert.pem and key.pem in the current directory and will overwrite any existing files.

  • Options:
    • --host value: Comma separated hostnames and ips which this certificate is valid for. Wildcards are supported. Required.
    • --ecdsa-curve value: ECDSA curve to use to generate a key. Optional. Valid options are P224, P256, P384, P521.
    • --rsa-bits value: Size of RSA key to generate. Optional. Ignored if --ecdsa-curve is set. (default: 3072).
    • --start-date value: Creation date. Optional. (format: Jan 1 15:04:05 2011).
    • --duration value: Duration which the certificate is valid for. Optional. (default: 8760h0m0s)
    • --ca: If provided, this cert generates it's own certificate authority. Optional.
  • Examples:
    • gitea cert --host git.example.com,example.com,www.example.com --ca

dump​

Dumps all files and databases into a zip file. Outputs into a file like gitea-dump-1482906742.zip in the current directory.

  • Options:
    • --file name, -f name: Name of the dump file with will be created. Optional. (default: gitea-dump-[timestamp].zip).
    • --tempdir path, -t path: Path to the temporary directory used. Optional. (default: /tmp).
    • --skip-repository, -R: Skip the repository dumping. Optional.
    • --skip-custom-dir: Skip dumping of the custom dir. Optional.
    • --skip-lfs-data: Skip dumping of LFS data. Optional.
    • --skip-attachment-data: Skip dumping of attachment data. Optional.
    • --skip-package-data: Skip dumping of package data. Optional.
    • --skip-log: Skip dumping of log data. Optional.
    • --database, -d: Specify the database SQL syntax. Optional (supported arguments: sqlite3, mysql, mssql, postgres).
    • --verbose, -V: If provided, shows additional details. Optional.
    • --type: Set the dump output format. Optional. (formats: zip, tar, tar.sz, tar.gz, tar.xz, tar.bz2, tar.br, tar.lz4, tar.zst default: zip).
  • Examples:
    • gitea dump
    • gitea dump --verbose

generate​

Generates random values and tokens for usage in configuration file. Useful for generating values for automatic deployments.

  • Commands:
    • secret:
      • Options:
        • INTERNAL_TOKEN: Token used for an internal API call authentication.
        • JWT_SECRET: LFS & OAUTH2 JWT authentication secret (LFS_JWT_SECRET is aliased to this option for backwards compatibility).
        • SECRET_KEY: Global secret key.
      • Examples:
        • gitea generate secret INTERNAL_TOKEN
        • gitea generate secret JWT_SECRET
        • gitea generate secret SECRET_KEY

keys​

Provides an SSHD AuthorizedKeysCommand. Needs to be configured in the sshd config file:

...
# The value of -e and the AuthorizedKeysCommandUser should match the
# username running Gitea
AuthorizedKeysCommandUser git
AuthorizedKeysCommand /path/to/gitea keys -e git -u %u -t %t -k %k

The command will return the appropriate authorized_keys line for the provided key. You should also set the value SSH_CREATE_AUTHORIZED_KEYS_FILE=false in the [server] section of app.ini.

NB: opensshd requires the Gitea program to be owned by root and not writable by group or others. The program must be specified by an absolute path. NB: Gitea must be running for this command to succeed.

migrate​

Migrates the database. This command can be used to run other commands before starting the server for the first time. This command is idempotent.

doctor check​

Diagnose and potentially fix problems with the current Gitea instance. Several checks are run by default, but additional ones can be run:

  • gitea doctor check --list - will list all the available checks
  • gitea doctor check --all - will run all available checks
  • gitea doctor check --default - will run the default checks
  • gitea doctor check --run [check(s),]... - will run the named checks

Some problems can be automatically fixed by passing the --fix option. Extra logging can be set with --log-file=....

doctor recreate-table​

Sometimes when there are migrations the old columns and default values may be left unchanged in the database schema. This may lead to warning such as:

2020/08/02 11:32:29 ...rm/session_schema.go:360:Sync() [W] Table user Column keep_activity_private db default is , struct default is 0

You can cause Gitea to recreate these tables and copy the old data into the new table with the defaults set appropriately by using:

gitea doctor recreate-table user

You can ask Gitea to recreate multiple tables using:

gitea doctor recreate-table table1 table2 ...

And if you would like Gitea to recreate all tables simply call:

gitea doctor recreate-table

It is highly recommended to back-up your database before running these commands.

doctor convert​

Converts a MySQL database from utf8 to utf8mb4 or a MSSQL database from varchar to nvarchar.

manager​

Manage running server operations:

  • Commands:
    • shutdown: Gracefully shutdown the running process
    • restart: Gracefully restart the running process - (not implemented for windows servers)
    • flush-queues: Flush queues in the running process
      • Options:
        • --timeout value: Timeout for the flushing process (default: 1m0s)
        • --non-blocking: Set to true to not wait for flush to complete before returning
    • logging: Adjust logging commands
      • Commands:
        • pause: Pause logging
          • Notes:
            • The logging level will be raised to INFO temporarily if it is below this level.
            • Gitea will buffer logs up to a certain point and will drop them after that point.
        • resume: Resume logging
        • release-and-reopen: Cause Gitea to release and re-open files and connections used for logging (Equivalent to sending SIGUSR1 to Gitea.)
        • remove name: Remove the named logger
          • Options:
            • --group group, -g group: Set the group to remove the sublogger from. (defaults to default)
        • add: Add a logger
          • Commands:
            • console: Add a console logger
              • Options:
                • --group value, -g value: Group to add logger to - will default to "default"
                • --name value, -n value: Name of the new logger - will default to mode
                • --level value, -l value: Logging level for the new logger
                • --stacktrace-level value, -L value: Stacktrace logging level
                • --flags value, -F value: Flags for the logger
                • --expression value, -e value: Matching expression for the logger
                • --prefix value, -p value: Prefix for the logger
                • --color: Use color in the logs
                • --stderr: Output console logs to stderr - only relevant for console
            • file: Add a file logger
              • Options:
                • --group value, -g value: Group to add logger to - will default to "default"
                • --name value, -n value: Name of the new logger - will default to mode
                • --level value, -l value: Logging level for the new logger
                • --stacktrace-level value, -L value: Stacktrace logging level
                • --flags value, -F value: Flags for the logger
                • --expression value, -e value: Matching expression for the logger
                • --prefix value, -p value: Prefix for the logger
                • --color: Use color in the logs
                • --filename value, -f value: Filename for the logger -
                • --rotate, -r: Rotate logs
                • --max-size value, -s value: Maximum size in bytes before rotation
                • --daily, -d: Rotate logs daily
                • --max-days value, -D value: Maximum number of daily logs to keep
                • --compress, -z: Compress rotated logs
                • --compression-level value, -Z value: Compression level to use
            • conn: Add a network connection logger
              • Options:
                • --group value, -g value: Group to add logger to - will default to "default"
                • --name value, -n value: Name of the new logger - will default to mode
                • --level value, -l value: Logging level for the new logger
                • --stacktrace-level value, -L value: Stacktrace logging level
                • --flags value, -F value: Flags for the logger
                • --expression value, -e value: Matching expression for the logger
                • --prefix value, -p value: Prefix for the logger
                • --color: Use color in the logs
                • --reconnect-on-message, -R: Reconnect to host for every message
                • --reconnect, -r: Reconnect to host when connection is dropped
                • --protocol value, -P value: Set protocol to use: tcp, unix, or udp (defaults to tcp)
                • --address value, -a value: Host address and port to connect to (defaults to :7020)
            • smtp: Add an SMTP logger
              • Options:
                • --group value, -g value: Group to add logger to - will default to "default"
                • --name value, -n value: Name of the new logger - will default to mode
                • --level value, -l value: Logging level for the new logger
                • --stacktrace-level value, -L value: Stacktrace logging level
                • --flags value, -F value: Flags for the logger
                • --expression value, -e value: Matching expression for the logger
                • --prefix value, -p value: Prefix for the logger
                • --color: Use color in the logs
                • --username value, -u value: Mail server username
                • --password value, -P value: Mail server password
                • --host value, -H value: Mail server host (defaults to: 127.0.0.1:25)
                • --send-to value, -s value: Email address(es) to send to
                • --subject value, -S value: Subject header of sent emails
    • processes: Display Gitea processes and goroutine information
      • Options:
        • --flat: Show processes as flat table rather than as tree
        • --no-system: Do not show system processes
        • --stacktraces: Show stacktraces for goroutines associated with processes
        • --json: Output as json
        • --cancel PID: Send cancel to process with PID. (Only for non-system processes.)

dump-repo​

Dump-repo dumps repository data from Git/GitHub/Gitea/GitLab:

  • Options:
    • --git_service service : Git service, it could be git, github, gitea, gitlab, If clone_addr could be recognized, this could be ignored.
    • --repo_dir dir, -r dir: Repository dir path to store the data
    • --clone_addr addr: The URL will be clone, currently could be a git/github/gitea/gitlab http/https URL. i.e. https://github.com/lunny/tango.git
    • --auth_username lunny: The username to visit the clone_addr
    • --auth_password <password>: The password to visit the clone_addr
    • --auth_token <token>: The personal token to visit the clone_addr
    • --owner_name lunny: The data will be stored on a directory with owner name if not empty
    • --repo_name tango: The data will be stored on a directory with repository name if not empty
    • --units <units>: Which items will be migrated, one or more units should be separated as comma. wiki, issues, labels, releases, release_assets, milestones, pull_requests, comments are allowed. Empty means all units.

restore-repo​

Restore-repo restore repository data from disk dir:

  • Options:
    • --repo_dir dir, -r dir: Repository dir path to restore from
    • --owner_name lunny: Restore destination owner name
    • --repo_name tango: Restore destination repository name
    • --units <units>: Which items will be restored, one or more units should be separated as comma. wiki, issues, labels, releases, release_assets, milestones, pull_requests, comments are allowed. Empty means all units.

actions generate-runner-token​

Generate a new token for a runner to use to register with the server

  • Options:
    • --scope {owner}[/{repo}], -s {owner}[/{repo}]: To limit the scope of the runner, no scope means the runner can be used for all repos, but you can also limit it to a specific repo or owner

To register a global runner:

gitea actions generate-runner-token

To register a runner for a specific organization, in this case org:

gitea actions generate-runner-token -s org

To register a runner for a specific repo, in this case username/test-repo:

gitea actions generate-runner-token -s username/test-repo